KraussMaffei Extrusion Reduces Manufacturing Costs for PVC Roofing Membranes

KraussMaffei Extrusion Reduces Manufacturing Costs for PVC Roofing Membranes

Getting your Trinity Audio player ready...

KraussMaffei Extrusion has developed a new single-stage extrusion process for manufacturing PVC roofing membranes. Compared to the conventional two-stage process with a separate heating-cooling-mixing combination, the new PVC InlineMixing process significantly reduces energy costs, shortens production time, and results in a rapid return on investment for the system. In addition, the continuous process offers high flexibility when changing formulations as well as significantly lower staff requirements compared to a system that uses dry-blend premixing.

Traditionally, PVC roofing membranes are manufactured in two stages: PVC powder, plasticisers, additives and fillers are first processed batchwise in a separate hot-cold mixer combination to produce a dryblend. After cooling and intermediate storage, the mixture is then plasticised in a twin-screw extruder and processed into membranes. With its new PVC InlineMixing process, KraussMaffei Extrusion now offers a continuous alternative. All solid and liquid components are fed directly into the extruder via gravimetric dosing systems, exactly as required.

Greater Cost-Effectiveness, Greater Flexibility

The new PVC InlineMixing process increases cost-effectiveness compared to the two-stage process in several ways: There is no need to invest in a separate heating-cooling-mixing combination. In addition, the material needs to be heated only once. Overall, energy consumption and thus energy costs are reduced by up to 75 percent depending on the formulation, the system parameters, and the location.

Eliminating the separate mixing process also reduces the space required for the entire system as well as labour costs. In addition, maintenance costs are lower because wear parts for the heating-cooling mixer are no longer needed. The combination of lower capital expenditures (CAPEX) and lower operating costs (OPEX) thus improves the overall cost-effectiveness and creates the conditions for a quick return on investment.

Another advantage is greater flexibility in production: formula adjustments and colour changes can be implemented directly during operation via the integrated control system. This eliminates the need for time-consuming preparation and interim storage of separate dryblend batches.

“For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing. They can respond more quickly to new requirements, adjust formulations directly during the production process and at the same time reduce their energy and capital expenditure,” explains Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion.

Successfully Tested at the Technology Center in Laatzen

The new PVC InlineMixing process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated using industrial roofing membrane formulations. A co-rotating twin-screw extruder of the ZE 65 BluePower series was used, equipped with loss-in-weight feeders for all solid components as well as multiple liquid feeders for free-flowing formulation components.

The ZE BluePower series features a Da/Di ratio of 1.65. The combination of high torque and large free volume provides a wide process window for the flexible processing of different formulations.

The tests confirmed excellent gelation levels of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements. This was validated for several formulations.

“The results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production. At our Technology Center, we work with customers to test their specific formulations under production-relevant conditions, optimise the process and establish the basis for successful industrial implementation,” explains Christopher Bartel.

Already in Successful Industrial Operation

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h using two extruders and two calenders. In this process, PVC, additives, and fillers, as well as the resulting edge trimmings, are continuously processed directly into finished membranes.

With PVC InlineMixing, KraussMaffei Extrusion demonstrates how high product quality can be combined with a leaner production process, resulting in more cost-effective and flexible PVC roofing membrane production.

Read more news from KraussMaffei here.

KraussMaffei Logo

KraussMaffei
+44 (0) 1925 644100
Website
Email

Stay connected via Google News Add PlastikMedia as a preferred source on Google

Related Posts

Subscribe to our newsletter